Intensive Care Warmer Neonatal

Neonatal Resuscitation equipment history inbuilt LED Phototherapy attached made with hi quality unique FRR (Fire Retardant Resin) design for ultimate safety from fire and electric shocks. Radiant Warmers are full featured NICU equipment to meet Neonatal critical care requirements for new-born baby those in need of temperature maintenance

Technical Specifications

Technology	WARMER Microprocessor based servo controlled electronic controller. PHOTOTHERAPY Top surface Inbuilt LED phototherapy with digital timer for both total lamp usage and patient exposure
Mode	Skin, Air and Manual Control.
Temperature	Setting from 19°C to 39°C with heater power bar graph indication.
Display	Two bright LED digital displays combination of Red and Green to continues monitor of baby temp and set temp, with easily switchable to °C to °F
LCD Screen	Bright backlight LCD screen with full information of both Baby and Air mode along with alarm indication massages.
Safety	Independent Hi temp cut off with Hi temp sensor at 39°C
Apgar Timer	Can be used as a stop watch to measure heart rate and as a APGAR timer in labour ward
Alarms	Audio and Visual indications for Baby Probe Failure, Air Probe Failure, Heater Failure,1°C high, 1°C low Hi temp cut off, System failure Power fail indication
Skin Probe	Used latest technology hi sensitivity skin sensor to maintain uniform temperature
Air Sensor	Hi sensitivity air sensor used in air mode to maintain uniform temperature all over the baby tray with high accuracy of ± 0.5°C
Manual Mode	Heater power can be fixed manually with increments of 20% to 100% with Heater power bar graph indication
Heater	German make ceramic heater with parabolic reflector to maintain uniform temp across the baby bed (Optional quartz filament heater)
Phototherapy	High bright super flux LED Based Unit, LED lamps specially made for Phototherapy treatment, LED total life time fifty thousand usage Hours
Treatment	Maximum irradiance at Skin level upto 30μw/cm2/nm at 420 at 490nm
Examination Lamp	Latest power saving high bright LED observation lamp for procedures with adjustable facility to focus on required area during procedures
Main Unit	Made with high quality FRR Fibre with high quality polyurethane painting for long lasting life with extra safety from electric shocks and corrosion
Baby Tray	Made with high quality FRR [Fire Retardant Resin] grade fiber material for extra safety from electric shocks and corrosion, Newly designed oval shape baby tray with three sides collapsible clear acrylic panels. Head up & down tilting facility for baby tray, Clear acrylic base for under surface phototherapy with X –Ray cassette compartment
Source Unit	Latest design swivel type source unit with German make ceramic heater fixed in a parabolic reflector to maintain uniform temperature all over the baby tray, easy rotatable either side to take bed side X-ray and during procedures
Monitor Tray	Side monitor tray provision to keep Monitor or Pulse Oximeter
IV Stand	Side IV pole to mount multiple Syringe or Infusion pumps with adjustable stainless steel IV inner
Bottom Tray	To keep Resuscitation items or Bottom surface Phototherapy unit
Base	Mounted on imported anti-skid casters with locking facility
Power	AC 240V, 50 Hz, 1000W Maximum, Fuse rating 6 Amps
Dimensions	Baby bed -800 (L) X 700 (W) mm oval shape Mattress -800 (L) X 700(W) mm Main unit – 1100(L) X 750 (W) X 1900 (H) Weight (Approximate) – 85 kg
Humidity range – 10% to 75% RH Transport / Storage Temperature range – 10°C to 60° Optional: bottom surface phototherapy unit

Physical Specifications

• Inbuilt Slow Suction unit for neonate use, operated from the front panel
• Baby bassinet of the unit equipped with baby weighing scale
• Integrated CPAP System and Inbuild Pulse oximeter for SpO2, heart pulse rate.
• Inbuilt blender for controlling the level of Oxygen concentration from 21% to 60% with medical air compressor
• Oxygen analyzer to monitor O2 level within acrylic Oxygen Hood.
• Provision to fix two Oxygen Cylinder 10 liters with flowmeter at the back of Unit.
• Height adjustable system by foot switch.
• Base of the units is equipped with three drawers

---

• Specially designed for the occasions in use of frequent sterilizations.
• Equipped with the microprocessor for intelligent control
• Man-machine interface for convenient operation.

This Autoclave is specially designed for the occasions in use of frequent sterilizations. It is equipped with the microprocessor for intelligent control and man-machine interface for convenient operation. With the distinctions in displaying parameter and condition actively, evaluating malfunction automatically, shutting of for self-protection automatically in case of excessive temperature and pressure, this type autoclave is reliable product in sterilizing.

 

The Front loading Stericlave has the preset cycle at 121°C and 134°C with time adjustment facility. You can choose the cycle as required and adjust time accordingly. The FLS has the LED display that displays the temperature throughout the cycle & the remaining time when the sterilizing cycle is in progress. LED Display also helps in setting the sterilizing cycle and time. The outer body is CNC fabricated in MS sheet which is further powder coated to make it corrosion free. Inner chamber is constructed in rust proof Stainless steel 304 with the capacity of 18 liters. Inner trays of the FLS are made of Aluminum corrosion resistant material. The dimension of the autoclaves should be within range of 360-390mm x 400-420mm x 520 – 530 mm.

 

The FLS has the Automatic failure detections system with Visual Error messaging / Protection measures.

• When sensor is not working, ‘Err1’ blinks on the display and unit cut of the heater supply.
• When temperature goes above preset cycle temperature, ‘Err2’ blinks on the display and unit cut of the heater supply.
• The FLS is equipped with a separate spring loaded safety valve for extra safety.

 

The FLS has the option:

• At any point of time during the cycle or on the standby mode it is required to switch of the power, long press the Power key. To start again long press the power Key.
• After completing the heater cycle display shows ’done’ with audible beep sound for 30 sec.
• When heater is ‘ON’ “H” will appear on the display.

 

The FLS has the Features:

• Automatic water intake.
• Double thermodynamic initial vacuum.
• Gives the audible double beep when the sterilizing cycle starts and single beep every minute till the end of the cycle to ensure the cycle is in progress.
• Automatic water /steam exit after the cycle is complete.
• Dry cycle starts after the sterilizing cycle is complete.
• All systems are controlled by Microprocessor for convenient handling.

 

Technical Data:

Particulars	Type 1
Chamber Capacity	250 X 350 mm
Outside Size( L * W* H)CM	51 x 43 x 37cm
Sterilize Temperature/Cycle	Preset 121° C & 134 ° C
Sterilize Pressure (Map)	0.10 Mpa & 0.21 Mpa
Sterilize Time [Adjustable]	20-25 Min & 4-6 Min
Dry Time	8-10 Min.
Heater	1500W
Chamber Material Quality & Volume	Inner Chamber Stainless Steel 316 L / 20 liters (Approx.)
Electric Current	220 / 230 V AC, 50 Hz
Safty Equipment	Physical Spring Safety valve. Overheat protection inbulit system in Microchip.
Automatic water Intake	Yes
Disinfection principal / ThermodynamicIntial Vacuum	Pulse Exhaust sysytemUses the Hot vapor power emmissions cold air/ 2 Times
Automatic water/Steam Exit	Yes (After the sterilization cycle)
Water Reservior	Yes
Temperature and Time display	LED Process status Display
Sterilizing Cycle time	Time for sterilizing cycle can be set as required
Pressure display	Pressure gauge
Accessories	Standard accessories ( Aluminum Trays = 3pc . Tray frame = 1Pc. Take plate *1pcs)

---

Loading Ways of Goods:

The goods is put into the sterilizer chamber by hands.

Steam Generator:

The sterilizer has inbuilt electric heating steam generator, which generates the steam for sterilizing by itself.

Parameter Table:

#	Model	Capacity	Main Parameter
1	TSQ-23098-TKS -202II	250 Liter	Automatic door， inbuilt electric heating steam generator
			SS 304 chamber and SS 304 outside material
2	TSQ-23098-TKS -202II-D	250 Liter	Automatic control，inbuilt electric heating steam generator; SS 304 chamber and SS 304 outside material
3	TSQ-23098-TKS -203II	360 Liter	Automatic control， External connecting electric heating steam generator (factory do not supply this steam generator)
			SS 304 chamber and SS 304 outside material
4	TSQ-23098-TKS -203II-D	360 Liter	Automatic control, Inbuilt electric heating steam generator
			SS 304 chamber and SS 304 outside material
5	TSQ-23098-TKS -206II	600 Liter	Automatic control, External connecting electric heating steam generator (factory do not supply this steam generator)
			SS 304 chamber and SS 304 outside material
6	TSQ-23098-TKS -206II-D	600 Liter	Automatic control Inbuilt electric heating steam generator
			SS 304 chamber and SS 304 outside material
7	TSQ-23098-TKS -208II	800 Liter	Automatic control， External connecting electric heating steam generator (factory do not supply this steam generator)
			SS 304 chamber and SS 304 outside material
8	TSQ-23098-TKS -210II	1200 Liter	Automatic control， External connecting electric heating steam generator (factory do not supply this steam generator)
			SS 304 chamber and SS 305 outside material
9	TSQ-23098-TKS -215II	1500 Liter	Automatic control， External connecting electric heating steam generator (factory do not supply this steam generator)
			SS 304 chamber and SS 306 outside material
10	TSQ-23098-TKS -220II	2000 Liter	Automatic control， External connecting electric heating steam generator (factory do not supply this steam generator)
			SS 304 chamber and SS 307 outside material
11	TSQ-23098-TKS -225II	2500 Liter	Automatic control， External connecting electric heating steam generator (factory do not supply this steam generator)
			SS 304 chamber and SS 308 outside material

---

Fumigator (Aerosol)

• Fumigator converts formalin in to Aerosol from which is 100% biocidal with an adequate of Penetrability to destroy every
• Fumigator works with an amazing Its powerful mechanism instantly converts liquid formalin into true aerosol particles. The portable handy and easy to operate unit can be handled by any staff member or even a room boy. There is virtually no maintenance required.
• Every Fumigator passes through stringent quality control tests at various stage of manufacturing before it reaches
• Max Height : 390mm, weight :5Kg. (Approx.)
• Atomazing Capacity : 30-50 ml/min.
• Also available with “Timer” kindly add “T” with regular

 

Capacity in Liters	Deluxe	Super Deluxe
1.5	KVFA 791	KVFA 666
5	KVFA 792	KVFA 667

Autoclave: Vertical

Autoclave is  Equlpped with:

• Steam release valve.
• Double Excess pressure Spring safety valve for extra safety,
• Pressure gauge
• Water Drain outlet.
• Heating element 3kw. 220v – 50hz

 

Construction:

• All Stainless Steel construction,
• Inner Chamber (size: 400 × 600 mm) is construction from stainless steel 304 sheet.
• Double walled construction, lid is made of thick die  pressed SS 304 Sheet in mirror finish.
• the unit is fitted with 8 wing nuts to hold the lid at high pressure.
• automatic Sterilizing cycle at 121˚ C.

 

Sterilizing Cycle & Features:

• Sterilizer cycle s fully automatic & controlled by microchip Controlled coupled with sensor which senses the temperature of inner chamber.
• The Microchip controlled also displays the inner chamber temperature and the remaining time of the sterilization cycle.
• It also gives us the time adjustment facility to increase or decrease the sterilizer time as per the requirement of the end user.
• During the heater cycle display will shows remaining time at every minute with one beep sound .
• After completing the heater cycle display shows “done” with  beep sound for 30 sec
• At any point of time during the cycle or on the standby mode it is required to switch off the power,long press the Power key. And to start again long press the power key.
• Depressurizing & Unlocking the unit is manual.

 

Working Pressure & Temperature

• The working pressure for sterilization process is (15psi – 17 psi)
• The working Temperature for sterilization process is 121˚C.

 

Unit protection measure:-

• When sensor is not working, “Err1” blinking on the display and unit cut off the heater supply.
• When temperature goes above 125˚C , “Err1” blinking on the display and cut off the heater supply.

 

Buzzer:

• When any key is press buzzer is activate.

---