Cytogenetic Drying Chamber has been specifically designed to minimize all problems related to those critical parameters, temperature and humidity, which are very unstable. It allows the technician to set and control both temperature and humidity, thus defining the ideal working conditions for chromosomes. Cytogenetic Test Chamber provides the optimum controlled temperature and humidity environment for achieving ideal chromosome spreading results.

Features:

• Full view polycarbonate door.
• Upward sliding door hinged with silicon gaskets.
• Facilitates accurate and repeatable chromosome spreading.
• Door design provides easy access to workspace, and maximum visibility.
• Quickly reaches test conditions minimizing stability time.
• Baffling minimizes the effects of airflow in the side preparation area.
• Microprocessor temperature/humidity programmer.
• Computer communications, networking, data-logging software.
• Colour touch panel.
• HMI+PLC in one unit
• Door open and Door close alarm system.
• Circular chart recorder can be added on demand.
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber – Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Heated Viewing Window – Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Aesthetically designed – Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant interior and exteriors – Corrosion resistant coatings like epoy coatings are applied inside and outside the chamber to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – Chamber uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving chamber.
• CFC – free cooling – The air cooled refrigerator use CFC (chlorofluorocarbon)-free refrigerants those are ozone friendly and eco-friendly.
• Sturdy Construction -Chambers are built with robustness to withstand stress and strain, giving the chamber long life and ability to perform in extreme stress environments.
• Low Maintenance – systems benefit in retaining proper functionality over long period of time.
• Light Weight: Compact and superior materials ensure the chamber be light weight.
  

Specifications:

The post Cytogenetic Drying Chamber appeared first on LSP Tech.

Photo Stability Test Chamber are widely used for confirmatory studies as per ICH GUIDELINES (ICH Q1B) for direct comparison of drug substance under controlled environmental conditions, where samples are exposed to light illumination level of 1.2 million lux, which is effectively controlled through a programmable illumination controller and ultra violet light module incorporated in the same module with protection coating, designed to provide a UV light energy which can also be controlled from 200 watt hour per sq. m. to allow direct comparisons to be made between the drug substance and drug product. The Chamber also known as Pharmaceutical Stability Test Chamber and Pharma Stability Test Chamber.

Features:

• Microprocessor Based Controllers
• HMI+PLC in One Unit
• CFC Free Refrigeration Unit.
• RS 232/485Interface.
• Door Open and Close Alarm System
• Color Touch Panel.
• Castors for Ease to Moving.
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber – Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Heated Viewing Window – Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Aesthetically designed – Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant interior and exteriors – Corrosion resistant coatings like epoy coatings are applied inside and outside the chamber to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – Chamber uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving chamber.
• CFC – free cooling – The air cooled refrigerator use CFC (chlorofluorocarbon)-free refrigerants those are ozone friendly and eco-friendly.
• Sturdy Construction -Chambers are built with robustness to withstand stress and strain, giving the chamber long life and ability to perform in extreme stress environments.
• Low Maintenance – systems benefit in retaining proper functionality over long period of time.
• Light Weight: Compact and superior materials ensure the chamber be light weight.
  

Specifications:

Customizable sizes are also available.

The post Photostability Test Chamber appeared first on LSP Tech.

Drug Stability Test Chamber specially designed equipments that are used for studying the stability and shelf life of various drugs and drug-related substances. They are also employed for biological studies, seed testing and testing of mechanical and electronic components and find widespread usage in pharmaceutical industries, biotechnology industries, food industries, medicine research and scientific research institutes.  Stability Test Chambers are capable of providing highly accurate and optimum conditions of temperature, humidity and illumination for long-term stability tests. They are suitable for long-term experiments, high temperature tests, accelerated tests as well as stability tests under bright lights. Drug Stability Test Chamber and Stability Chamber are designed in accordance with international standards and bear CE certification for safety and reliability.

Features:

• Easy to read digital LCD display
• Independent devices for over-temperature and short circuit protection of workroom
• Visible light source configuration
• Lightweight easy way of adding water for automatic water recovery
• Water purification filters for maintaining clean water supply
• HMI+PLC control unit.
• Color touch panel
• RS 232/485 interface.
• CFC FREE REFRIGERATION UNIT
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber – Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Heated Viewing Window – Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Aesthetically designed – Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant interior and exteriors – Corrosion resistant coatings like epoy coatings are applied inside and outside the chamber to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – Chamber uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving chamber.
• CFC – free cooling – The air cooled refrigerator use CFC (chlorofluorocarbon)-free refrigerants those are ozone friendly and eco-friendly.
• Sturdy Construction -Chambers are built with robustness to withstand stress and strain, giving the chamber long life and ability to perform in extreme stress environments.
• Low Maintenance – systems benefit in retaining proper functionality over long period of time.
• Light Weight: Compact and superior materials ensure the chamber be light weight.
  

Specifications:

Customizable sizes are also available.

Walk In Stability Test Chamber

Features:

• Large range of capacities from 2000 Lt to 20,000 Lt.
• Independent devices for over-temperature and short circuit protection of workroom.
• Visible light source configuration.
• Lightweight easy way of adding water for automatic water recovery.
• Water purification filters for maintaining clean water supply
• HMI+PLC control unit.
• Color touch panel
• RS 232/485 interface.
• CFC FREE REFRIGERATION UNIT
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber – Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Heated Viewing Window – Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Aesthetically designed – Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant interior and exteriors – Corrosion resistant coatings like epoy coatings are applied inside and outside the chamber to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – Chamber uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving chamber.
• CFC – free cooling – The air cooled refrigerator use CFC (chlorofluorocarbon)-free refrigerants those are ozone friendly and eco-friendly.
• Sturdy Construction -Chambers are built with robustness to withstand stress and strain, giving the chamber long life and ability to perform in extreme stress environments.
• Low Maintenance – systems benefit in retaining proper functionality over long period of time.
• Light Weight: Compact and superior materials ensure the chamber be light weight.
  

Specifications:

Working Sizes (WXDXH)

Customizable sizes are also available.

The post Stability Test Chamber appeared first on LSP Tech.

Environmental Test Chambers/Environmental Control Chambers are conceptualized and designed study and contemplate the effects of different environmental parameters such as humidity, temperature and light in various applications tests involving micro-organisms, plants, tissues, electronic components etc. These environmental test/control chambers have a variety of usages in tissue culture applications, enzyme reaction studies, growth observation studies, fermentation analysis and various other general and specialized applications in various laboratories.

Features:

• Bench Top / Reach In And Walk in models available
• Capacity : 20 Ltrs to 20000 Ltrs
• HMI+PLC based controllers.
• Colored touch screen panel.
• Data logging facility with data analysis software.
• USB ports.
• Open and close door updates through mobile network.
• RS 232/485 connectivity.
• In built printer for printing graphs.
• Over and under temperature specimen protection
• Viewing window with automatic defogging.
• Temperature and humidity controlled by microprocessor based system.
• HMI+ PLC IN ONE UNIT:
• CFC FREE REFRIGERATION UNIT
• Less use of Electrical and Mechanical Components on the Top and Bottom of Chamber – Provides easy maintenance of chamber, increases durability because of proper air circulation; cooling systems kept at bottom of the chamber to provide proper environment for compressor.
• Heated Viewing Window – Heated viewing window allows viewing fog generated and proper viewing of the test sample.
• Aesthetically designed – Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant interior and exteriors – Corrosion resistant coatings like epoy coatings are applied inside and outside the chamber to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – Chamber uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving chamber.
• CFC – free cooling – The air cooled refrigerator use CFC (chlorofluorocarbon)-free refrigerants those are ozone friendly and eco-friendly.
• Sturdy Construction -Chambers are built with robustness to withstand stress and strain, giving the chamber long life and ability to perform in extreme stress environments.
• Low Maintenance – systems benefit in retaining proper functionality over long period of time.
• Light Weight: Compact and superior materials ensure the chamber be light weight.
  

Specifications:

Working sizes

Customizable sizes are also available

The post Environment Test Chambers appeared first on LSP Tech.

The post Temperature and Humidity Control Chamber appeared first on LSP Tech.

The post Conditioning Test Chamber appeared first on LSP Tech.

Ageing Chamber has been designed to simulate environmental condition to test the stability and reliability of products under stressed environment. Microprocessor based Ageing Test Chambers are made in accordance with the international testing standards. The equipments are NABL, NSF certified and CE approved. Ageing Chamber maintains 25% to 95 % RH. The Test Chamber is digitally controlled delivering accurate result under controlled environmental conditions. This chamber also known as Accelerated Ageing Test Chamber.

The post Ageing Test Chamber appeared first on LSP Tech.

Our cement autoclaves are double walled units. Outer body of our autoclave is constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated.. The inner cylinder is made of heavy gauge welded steel sheet. Our autoclaves are air insulated from inside, however we may incorporate mineral glass wool insulation if the customer desires so. The strong lid constructed out of thick steel plate which is lined from inside with Stainless steel sheet of ss-304 grade has a wing nut locking arrangement.

Working pressure:

Working pressure for our standard model cement autoclave is between 60 -350 psi, however this can be upgraded to be used for higher pressures

Pressure Control:

The pressure inside our cement autoclave is controlled through a semi-automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient.

• Additional gaskets, heating units, pressure gauges and safety pop valves are available as replacement parts. Includes thermometer
• Semi Automatic Pressure Control Switch- IndfossPiezostat) – This semi-automatic device controls the pressure inside the chamber mechanically and cuts-off the current from the heating elements, when the desired/ set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level.
• (Digital Temperature Indicator Cum Controller) – This device indicates the temperature inside the chamber.
• Mechanical Timer With alarm System)- This is a semi-automatic device which is initiated once the pressure level inside the chamber reaches the desired value, it regulates the sterilization time of the media to be sterilized and when the desired time is passed, it activates the buzzer, which indicates that the sterilization cycle is complete and media can be extracted

The post Cement Autoclave appeared first on LSP Tech.